Product/Service

Multiprocessing System for CompactPCI

Source: PEP Modular Computers Inc.

Multiprocessing System for CompactPCI
The CP611 is an assignment processor designed to perform independent processing tasks when configured with a system controller processor such as the CP610
Request Information

The CP611 is an assignment processor designed to perform independent processing tasks when configured with a system controller processor such as the CP610. The system utilizes DEC's 21554 Drawbridge chip that implements a non-transparent PCI/PCI bridge. This enables the system to act as a slave to the system controller, and to appear as a single virtual device.

The system can accommodate most current Socket-7 microprocessors, including low-power versions, and those with clock rates in excess of 300 MHz. It has an on-board PMC slot, built-in numeric co-processor support, and has a SiS 5598 Pentium System Controller. Various memory options are offered, including 32 or 64 Mb on-board RAM, with the expansion capability of 64 Mb of EDO or SDRAM on a SODIMM module.

PEP Modular Computers Inc., 750 Holiday Dr., Building 9, Pittsburgh, PA 15220-2783. Phone: 412-921-3322; Fax: 412-921-3356.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information