Downloads

1. Airborne Detection of Chemical Powders Using Infrared Hyperspectral Imaging
   5/15/2013

   Applications involving maritime surveillance, border protection, homeland security, and command and control typically use airborne surveillance to detect various types of targets in order to determine shapes, temperatures, or chemical nature.

2. FAST Thermal Imaging – The New Way to Look at Explosions
   5/7/2013

   This application explores the use of a high speed, high performance infrared camera used to analyze dust cloud explosions. These types of explosions can occur in work areas where coal, flour, pollen, and powdered metal are present. To find out how infrared cameras can be used to study the ignition, explosion, propagation phenomologies, and other thermodynamic processes in dust cloud explosions, and to ultimately help prevent such explosions, download the application note.

3. Advanced Training for Thermal Hyperspectral Imaging
   4/25/2013

   Telops will be holding a training seminar on thermal hyperspectral imaging from July 8^th through the 12^th in Belvaux, Luxembourg.

4. World’s First 1500 fps Infrared Camera: FAST-IR 1500
   1/30/2013

   The FAST-IR 1500 is a high performance infrared camera that features 1500 fps full frame resolution, high sensitivity for targets that are difficult to detect, self-adjustment to fast temperature changes, and enhanced identification capability through the use of spectral characteristics.

5. World’s First 1500 fps Infrared Camera: FAST-IR 1500 Datasheet
   1/30/2013

   The FAST-IR 1500 is the world’s first 1500 fps infrared camera. It’s ideal for applications involving surveillance, system validation, ballistics, engine characterization, signature acquisition, combustion analysis, fluid dynamics, and more. This datasheet includes a detailed description of the IR camera, as well as information on its features and specifications.

6. Non-Reflective SP6T RF Switch: SWA-6200-500S Datasheet
   12/18/2012

   This Non-Reflective SP6T RF Switch operates in the 100 to 1000 MHz frequency range, has a 1.5dB (max) insertion loss, and 50 Ohms impedance. Its two most notable features, however, is that it requires only a positive supply of 10-15 volts, and the fact that it’s RS-422 controlled (most pin diode switches are TTL logic controlled). Download the datasheet for additional information on electrical, mechanical, and environmental specifications for this RF switch.

7. Airborne Infrared Hyperspectral Imager For Intelligence, Surveillance And Reconnaissance Applications
   10/19/2012

   Persistent surveillance and collection of airborne intelligence, surveillance and reconnaissance information is critical in today’s warfare against terrorism. High resolution imagery in visible and infrared bands provides valuable detection capabilities based on target shapes and temperatures. By Eldon Puckrin, Caroline S. Turcotte, Marc-André Gagnon, John Bastedo, Vincent Farley and Martin Chamberland

8. Ultra-Broadband Low Loss Power Divider
   10/11/2012

   Corry Micronics has developed a 6-way ultra-wide band power divider that has a typical insertion loss of 2 dB with a frequency range from 800 MHz to 18 GHz. The 6 way power divider is rated at 30W CW or 5W CW per input channel. The design is compact and rugged.

9. Ultra-Broadband Low Loss Power Divider Datasheet
   10/4/2012

   Corry Micronics has developed a 6-way ultra-wide band power divider that has a typical insertion loss of 2 dB with a frequency range from 800 MHz to 18 GHz. The 6 way power divider is rated at 30W CW or 5W CW per input channel. The design is compact and rugged.

10. ECM: The Top Seven Savings
    8/14/2012

    This white paper by iDatix, Corporation covers the top seven savings that organizations can expect to gain with the implementation of an Enterprise Content Management (ECM) solution.